Energy Efficiency

International Association of Lighting Designers (IALD)

May 8, 2026

Introduction to LEDs

May 8, 2026

Introduction to LED Lighting Light Emitting Diode (LED) is a relatively old technology, circa 1970, that has advanced from numeric displays and indicator lights to a range of new applications, including exit signs, accent lights, task lights, traffic lights, automobile lighting, signage, wall sconces, and outdoor lighting and downlighting. LEDs offer benefits such as small

Lighting Commissioning

May 8, 2026

Lighting Commissioning Spring 2003 Among the most frequently overlooked elements of any lighting design project is how the lighting system will be controlled. This is true for many reasons; cost, design time, confusion over contract scope, aversion to perceived risk of implementing new technologies. When moving forward with the practice of lighting design, these issues

Introduction to Occupancy Sensors

May 8, 2026

Introduction to Occupancy Sensors All lighting systems are operated with lighting controls, devices that switch lights on and off or devices that dim light output. The most common and basic lighting control is a simple on-off switch, which, when flipped, opens and closes the circuit, feeding or cutting off the electric current necessarily to operate

Track Lighting

May 8, 2026

  Track Lighting Track lighting is one of the most commonly used and misunderstood of the lighting system types. It is a powerful tool for a lighting designer but can also be rather confusing without an understanding of some basic track lighting principles. Because track lighting is very directional, track systems perform best as accent

Color Temperature

May 8, 2026

Color Temperature Color temperature, expressed on the Kelvin Scale (K), is the color appearance of the lamp itself and the light it produces. Imagine a block of steel that is steadily heated until it glows first orange, then yellow and so on until it becomes white hot. At any time during the heating, we could

Lighting & Productivity

May 8, 2026

Introduction In a typical commercial building, the cost of employing people outnumbers the cost of operating a lighting system by some 150 to one. Therefore, while even as high as a 50% reduction in lighting costs using energy-efficient lighting can have a positive impact on the bottom line, just a one percent increase in productivity

California Lighting Technology Center

May 8, 2026

Dim and Dimmer

May 8, 2026

  Dim and Dimmerby Eric Strandberg LC Dimmers today come in many styles and control many different types of loads. A typical building today may have a combination of line voltage and low voltage incandescent, fluorescent and even high intensity discharge loads. Proper matching of control system types to the load is very important. Not

Color Rendering

May 8, 2026

Color Rendering Color rendering, expressed as a rating from 0 to 100 on the Color Rendering Index (CRI), describes how a light source makes the color of an object appear to human eyes and how well subtle variations in color shades are revealed. The higher the CRI rating is, the better its color rendering ability.

Previous Next